1
2
OSB-1 Outlaw Sound Bar
Quick Start Guide
1 OSB-1 Outlaw Sound Bar
1 Mounting Template
2 tall feet
Instruction Manual
4 short feet
AC Power Supply
Power Supply Cable
Remote Control
(with battery)
Inverse Control Panel Label
SOURCE
MODE
•2-CHANNEL
•3-CHANNEL
•5-CHANNEL
•5-EXPANDED
SPEECH
MUTE
TREBLE
VOLUME
BASS
MODE
SOURCE
S1 IN
BASS
SPEECH
TREBLE
What’s in the Box?
For wall mounting (or
mounting on a TV bracket),
orient the speaker with
Control Pod on the bottom
For cabinet or shelf mount-
ing, orient the speaker with
Control Pod on the top.
Use the 4 Small
round rubber spacers
for level placement
Use the 2 large rect-
angular feet with 2
of the small round
rubber spacers for
angled placement
Use 2 of the small
round rubber spacers
to isolate the speaker
from the wall
Rubber foot
Rubber feet
Use taller feet for up or down tilt
Adhesive side
Side view
Side view
Adhesive side
Where should you locate your sound bar?
The OSB-1 can be used as a set-top or shelf-mounted speaker. Self-adhesive
rubber feet are included to prevent vibration, protect the mounting surface
and serve to angle the speaker up or down if needed.
You may also simply mount the speaker to the wall using the built-in keyhole
brackets or attach it to a suitably equipped articulating flat-panel TV wall
mount via the threaded inserts on the rear panel of the OSB-1.
24VDC 4A
IR IN
S3 IN
S2 IN
S4 IN
S5 IN
analog
digital
coaxial
optical
L
R
SUB OUT
ON/OFF
16" (406mm)
9
7
⁄
8
" (251mm)
4
15
⁄
16
"
(125mm)
OSB-1 rear
1 Optical Cable
