Outdoor Revolution
MODEL Momentum Cayman XL
Thank you for purchasing an Outdoor Revolution product, this product will give years
of satisfactory service if basic instructions are followed, our products are designed for
durability and for ease of erection
.
Spare poles can be purchased to replace broken poles
** awnings will not be swapped because of broken poles**
Please read the following instructions carefully
TIP:
Refer to the photograph to help when pitching your Momentum Cayman
•
••
•
Please do not leave for your vacation without fully erecting and checking the contents of your
porch.
•
••
•
Ideally erect your porch for some period allowing it to weather.
•
••
•
Please make sure that before erecting, that you site the porch on clear Level ground with no sharp
objects underneath, and that all the zips are fully closed. (We recommend laying a groundsheet
down to keep the awning Dry and clean)
•
••
•
If you have any issues relating to pitching your awning please contact your dealer for instructions
before going on holiday.
IMPORTANT PLEASE CHECK YOUR EQUIPMENT
(Make yourself familiar with the awning and its parts before attempting to erect)
Contents
Flysheet (or outer)
2 x Fibreglass poles
Pegs (in a separate bag)
Outer carrying bag (with dimension details)
A selection of spare parts
ERECTION INSTRUCTIONS.
Outdoor revolution tents are all erected outer first
1.
Lay the outer/flysheet spread out on the ground. Slacken adjusters off on the black tapes (near the ring
and pin assemblies) around the foot of the awning.
2.
Open the pole bag and lay the poles out on the ground. Take one of the shaped fibreglass poles and open
it out, then slide it diagonally through one of the seams on the roof and down to the bottom corner at the
other side. Repeat the process with the other fibre pole, complete this by placing the steel pin on the ‘ring
