6
ASSEMBLY IS NOW COMPLETE.
PROCEED TO THE NEXT PAGE FOR
INSTRUCTIONS ON OPERATION AND
MAINTENANCE.
Position one table half (A8) onto the base top. Ensure
the notches in the underside of the table correspond
with the bolt heads of the base top.
From inside the hull, secure the table half (A8) to the
base top using the round head bolts (B7).
Repeat steps 8 and 9 for remaining half of table.
Attach the door (A9).
Confirm the heater control knob is turned to
the PILOT position and connect the gas hose
to your regulator and the regulator to your
gas bottle following your regulator supplier
instructions.
A8
B7
A8
From inside of the tables, secure the table bracket
(B10) to the two table half together using the table
bracket bolts (B7).
A8
B10
Note: please go to step 11 if the table is not
included for the model you purchased.
8
9
10
11
