Ouellet OCH-WB Series Installation And Maintenance Instructions Download Page 1

180, 3

rd

 Avenue, L’Islet, Quebec, G0R 2C0, CANADA

 Tel.: (418) 247-3947, 1-800-463-7043,  Fax: (418) 247-7801

www.ouellet.com

INSTRUCTIONS FOR THE INSTALLATION AND MAINTENANCE OF THE

“OCH and OCH-WB Series” Portable Heater 

WARNING

When using electrical appliances, basic precautions should always be followed to reduce the risk of fi re,

electrical shock and injury to persons, including the following:

9-  To disconnect heater, turn thermostat to off, then 
 

remove plug from outlet.

10- Connect to properly grounded outlet only.

11- Do not insert or allow foreign objects to enter any 
 

ventilation or exhaust opening as this may cause an 

 

electrical shock or fi re, or damage the heater.

12- To prevent a possible fi re, do not block air intakes or 
 

exhaust in any manner.  Do not use on soft surfaces, like 

 

a bed, where openings may become blocked.

13- Heater contains arcing and sparking parts.  
 

Do not use it in areas where gasoline, paint or 

 

fl ammable liquids are used or stored.

14- Use this heater only as described in this manual. Any 
 

other use not recommended by the manufacturer may 

 cause 

fi re, electrical shock, or injury to persons.

15- Avoid the use of extension cord because the extension 
 

cord may overheat and cause a risk of fi re. However, if 

 

you have to use an extension cord, the cord shall be 

 

No. 8 AWG minimum size and rated for not less 

 

than 30 amps.

16- This heater is not approved for use in corrosive 
 

atmospheres such as marine, green house or chemical 

 storage 

areas.

17- SAVE  THESE  INSTRUCTIONS

Read Carefully 

- These instructions contain necessary 

information for the proper installation, use and effi cient 
operation of the heater. Carefully read these instructions 
before installation, operation of the heater. Failure to adhere 
to the instructions could result in fi re, electric shock, serious 
personal injury, death or porperty damage. SAVE THESE 
INSTRUCTIONS and review frequently for continuing safe 
operation and instruction of future users, if necessary.

1-  Read all instructions before using this heater.

2-  This heater is hot when in use. To avoid burns, do not 
 

let bare skin touch hot surfaces. Use the handle when 

 

moving this heater. Keep combustible materials, such 

 

as furniture, pillows, bedding, papers, clothes, and 

 

curtains at least 12 in. (305 mm) from the front of the 

 

heater and keep them away from the sides and rear.

3-  Extreme caution is necessary when any heater is used 
 

by or near children or invalids and whenever the heater

 

is left operating and unattended.  

4-  Always unplug heater when not in use.

5-  Do not operate any heater with a damaged cord or plug 
 

or after the heater malfunctions, has been dropped 

 

or damaged in any manner. Return heater to authorized 

 

service facility for examination, electrical or 

 

mechanical adjustment, or repair.

6-  Do not use outdoors.

7-  This heater is not intended for use in bathrooms, 
 

laundry areas and similar indoor locations. Never locate 

 

heater where it may fall into a bathtub or other water 

 container.

CAUTION

Not for residential use in USA.

To prevent possible overheating - or damage due 
to overheating - keep at least 12 in. (305 mm) 
clearance in front of heater.

Respect minimum clearance installation as specifi ed in 
these instructions.

This heater is for use on 240 volts. The cord has a plug as 
shown in Figure 1. 

No adapter is available for this blade confi guration, and 
none should be used. The type of outlet is a 240 volt 
grounding outlet. When properly installed, it provides a 
ground connection through the cord to the heater to protect 
the operator from electrical shock.

Reviews: