Otto Bock SKIPPI Instructions For Use Manual Download | Manualshive

Page: 26 / 68

background image

CAUTION

Medical risks

Injuries, pressure sores due to application errors

►

Regular measures for pressure redistribution and skin examinations are required. Should skin irritation and/or
skin reddening occur, consult the qualified personnel who adapted and adjusted the product. Do not continue
using the product without consultation.

20

Applying the lap belt

1) Push the 2 halves together until the buckle engages

with an audible click.

→

The lap belt has to fit closely but not too tightly
so the user is not injured.

→

It should be possible to slide two fingers com
fortably between the strap and thigh.

2) Pull to check that it is secure.

Opening the lap belt

1) Press the release button.
2) Open the belt buckle and lay the belt to the side.

Cleaning the belt system

INFORMATION

Observe the washing recommendations on the product and the information in the corresponding instructions for
use provided for the product.

•

Belts with metal snaps may

not be washed in washing machines

as the penetration of water could cause

corrosion and subsequent malfunctions.

•

Clean the belt straps by gently dabbing them with warm soapy water (with some disinfectant) or carefully wiped
with a dry, clean, absorbent cloth.

Additional cleaning instructions

•

Allow the belts to air dry. Ensure that the belts and pads are completely dry before installation.

•

Do not expose the belts to direct heat (e.g. sunshine, stove or radiator).

•

Do not iron or bleach the belts.

8.7 Control unit

CAUTION

Risk of uncontrolled driving behaviour

Falling, tipping, collision with persons or nearby objects due to interference from electromagnetic fields

►

Switch all mobile devices off while driving.

►

Turn the control unit off when it is not needed.

The power wheelchair is controlled by an enAble40 control unit.
Because the control unit is programmable, it can be adapted to the personal requirements of the user; e.g. the
speed, acceleration and deceleration values can all be adapted.

8.7.1 Control panel

The power wheelchair is operated using the control panel.
The control panel consists of a button section, LCD screen and joystick. A charging receptacle is located on the
underside.
The control panel is used to switch the power wheelchair on and off, enter driving commands and display the cur
rent status of certain functions and components.

26

Use

Skippi

«
...
24
25
26
27
28
...
»

Summary of Contents for SKIPPI





































































Reviews:

No comments

Related manuals for SKIPPI

Brand: Mobilex Pages: 5

Freecurve Classic

Brand: Handicare Pages: 202

Brand: Comodita Pages: 24

Brand: decon Pages: 3

Brand: Harvest Healthcare Pages: 4

Brand: Vermeiren Pages: 248

Brand: Vela Pages: 2

Brand: Arjohuntleigh Pages: 32

Brand: Vitea Care Pages: 6

Brand: Vitea Care Pages: 12

Brand: Schuchmann Pages: 28

Brand: Schuchmann Pages: 16

Brand: Schuchmann Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands