8.15.1.1 Adjusting the control panel position
INFORMATION
By default, the control panel is mounted on the side specified in the order. It can also be mounted on the other
side of the power wheelchair later on if the user so desires. Please contact the qualified personnel who delivered
the product to you.
The depth position of the control panel is subsequently adjustable.
42
Adapting the control panel position to the forearm
length
1) Loosen the 3 set screws on the bottom of the arm
rest.
2) Slide the rail with the control panel forwards or
backwards.
INFORMATION: If the control panel rail is too
long it can be shortened. Please contact the
qualified personnel who adjusted your product.
3) Tighten the 3 set screws on the bottom of the arm
rest.
8.15.2 Lighting
Information on replacing broken lamps: see Page 66.
8.15.2.1 Lighting for road traffic
The installed lighting is suitable for driving in street traffic during hours of darkness.
The lights, right and left direction indicators and the warning flashers are operated via the control panel.
Front lighting
The 2 front lights (see fig. 43, left) each encompass a direction indicator lamp (bottom left) and an LED front lamp
(top left).
The front lights are fastened to the self-contacting side panels.
43
Side panel removal/installation
1) Loosen the thumb screw on the side panel holder.
2) Pull the side panel out from the side panel holder
and set it aside.
INFORMATION: When the side panels are
inserted into the side panel holders the con
tacts touch each other and current can flow
(see fig. 43, right).
INFORMATION: Carefully let the side panel with
the control panel hang down.
3) Insert the side panel back into the side panel hold
er.
4) Re-tighten the thumb screw on the side panel hold
er.
55
Skippi Plus
Use
