–
Nach hinten: Rückenlehne bewegt sich stufenlos nach hinten.
–
Nach vorn: Rückenlehne bewegt sich stufenlos nach vorn.
•
Der elektrische Antrieb verstellt die Rückenlehne, solange der Joystick ausgelenkt wird und bleibt in den End
lagen stehen.
•
Bitte beachten:
Es ist ein Neigungssensor verbaut, der die Fahrfunktion ab einen Rückenwinkel von 45° oder
ab einem Summenwinkel von 45° (Rücken Winkel der Sitzkantelung) in den Kriechgang schaltet. Der
Elektrorollstuhl fährt nun mit reduzierter Geschwindigkeit (15 %).
1 Foreword
English
This document applies to the custom fabrication SBK 20465.005.
2 Product description
The power back support angle adjustment enables continuous tilt adjustment of the back support on a standard
seat (see fig. 1).
The back support adjustment range is increased to approx.
-10° to +50°
due to the longer travelling path of the
adjustment motor being used in combination with the altered position of the crossbar.
3 Safety
WARNING
Failure to observe the instructions for use for the main product
Risk of accident and serious injury, damage due to failure to observe important information
►
The additional documentation only applies in connection with the instructions for use for the main product. A
knowledge of all the documents is a basic prerequisite for proper use.
►
For this reason, all information regarding use has to be carefully read before using the product and all safety
notices must be observed.
WARNING
Incorrect use of back support angle adjustment
Falling, tipping over due to driving with incorrect seat settings
►
Always move the back support to an upright position for driving.
►
Seat function adjustments are only permitted on firm, level surfaces.
►
Note that there is a risk of tipping when the seat tilt and back support angle adjustment functions are used
simultaneously. Do not use these seat functions at the same time.
►
Note that there is a risk of collision in the area of the back support when a luggage carrier is used. The back
support angle adjustment restricts the use of luggage carriers.
WARNING
Driving with power seat functions
Falling, tipping over due to driving with unallowable seat settings
►
Only drive in road traffic and on inclines and downgrades with the seat tilt and seat height adjustments
lowered and with a vertical backrest. Always use a belt system.
►
Slightly tilt the seat to the rear when driving down obstacles in a forward direction (e.g. curbs) and reduce the
speed.
►
Drive with the seat raised or with the seat tilt/back angle adjustment activated only for short distances at
home. Always use the speed level 1 for this. Note that the field of vision is limited when driving. Always use a
belt system.
►
Use the seat height adjustment and the seat tilt only on firm, level ground.
►
To avoid uncontrolled driving movements, ensure that the control unit is always in "Power seat functions"
mode before using the power seat functions.
►
To avoid hazardous situations, note the correct deflection direction of the joystick (Joystick functions).
5
SBK 20465.005
Foreword
Summary of Contents for SBK 20465.005
Page 2: ...1 2 2 SBK 20465 005 ...
Page 26: ...SBK 20465 005 26 ...