12 Technical data
INFORMATION
►
Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe
cified – cannot be adjusted in the mm range but only in increments of approx.
0.5 cm
or
1 cm
.
►
Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be
±10 mm and ±2°
.
Kimba seating unit
Size 1
Size 2
Seat width [mm]
200 – 300
260 – 350
Seat depth [mm]
190
1)
– 310
240 – 400
Back support height [mm]
410 – 610
560 – 700
Back support height (when using individually
adjustable head supports, the dimensions given for
the back support do not include the head supports)
[mm]
315 – 455
390 – 560
Back support angle [°]
80 – 180
2) 3) 4)
80 – 180
3)
Height of shoulder harness slots (min./max.) [mm]
250/450
360/500
Width of shoulder harness slots [mm]
50
50
Lower leg lengths [mm]:
•
Standard and angle-adjustable leg support
190 – 310
200 – 370
•
Angle-adjustable leg support for short lower leg
lengths
120 – 190
–
5)
Max. user weight [kg]
6) 7)
40
8)
40
Max. user weight for use in vehicles for transporting
persons with reduced mobility [kg]
9)
40
8)
40
Weight (with pads) [kg]
7.5
9.5
Folding size with hip supports (LxWxH)
10)
[mm]
580x370x420
590x430x580
1)
From
140 mm
with seat depth reducer option.
2)
With seat depth reducer option:
80°–160°
.
3)
With back support angle limiter option:
80°–130°
.
4)
May be limited by the push bar setting on the Kimba Home mobility base (470G71=900* Kimba).
5)
This leg support is offered only for size 1.
6)
Please note:
The maximum user weight for the seating unit depends on the maximum load for the outdoor mobil
ity base/seating shell mobility base that is being used. If the maximum user weight for the seating unit
plus
its own
weight is greater than the maximum load for the outdoor mobility base/seating shell mobility base, the maximum
allowable user weight for the seating unit is reduced accordingly.
7)
The following applies for the combination of the Kimba outdoor mobility base and Kimba seating unit:
•
Maximum user weight of the seating unit
(40 kg)
plus
the
weight of the seating unit itself
(7.5 kg, for
size 1) = 47.5 kg.
•
Maximum load for the outdoor mobility base
(55 kg)
minus
the
maximum user weight for the seating
unit
and
the weight of the seating unit itself
(47.5 kg) = 7.5 kg, which remains available for additional
accessories for a medical device and the weight in the storage basket.
•
If the seat has a lower load, the storage basket can be loaded with up to
15 kg
. Always comply with the maxim
um total load.
8)
When using the “angle-adjustable leg support for short lower leg lengths”, the maximum user weight is
35 kg
.
9)
Follow the instructions in the section “Use in vehicles for transporting persons with reduced mobility”.
10)
The actual folding size depends on the type of back support insert installed and the back support height adjust
ment.
Ambient conditions
Temperatures and relative humidity
Temperature during use [°C (°F)]
-10 to +40 (14 to 104)
Transport and storage temperature [°C (°F)]
-10 to +40 (14 to 104)
40
Technical data
Kimba
