Otto Bock Juvo, Instructions For Use Manual

Page: 85 / 124

Activating the satellite switch Satellite switch Function
Raise Swing in
Lower Swing out
Move towards operator On/off, EMERGENCY
STOP
Move away from operator User switch
6.15.6.2 Operating the swivel unit
The functions are stored in the standard programming as follows (special programming per customer request pos­
sible).
•
When the satellite switch is moved upwards, the swivel arm with the special control elements is swung into the
active position to control the wheelchair.
• When the satellite switch is moved downwards, the swivel arm with the special control elements is swung into
the passive position for getting in and out.
• A toggle switch is located on the swivel unit for operation of the swivel arm by an attendant. The symbols on the
toggle switch for swivelling in and out are the same as on the satellite switch.
6.15.7 Wireless environmental control
CAUTION
Incorrect installation and programming
Injuries due to falling, tipping over or collision of the wheelchair due to unexpected behaviour.
► Mounting, connecting and programming special controls, including the environmental control, is to be per­
formed only by personnel who have been authorised and trained by Ottobock.
NOTICE
Use of devices with electromagnetic emissions
Restriction of function due to electromagnetic fields
►
The performance of the product can be affected by electromagnetic fields (highly radiating devices such as
amateur radio or superimposed frequencies). If necessary, switch such devices off while using this product.
INFORMATION
The control device offers additional environmental control functions by default:
► The Bluetooth function integrated in the TEN° control panel supports the wireless operation of PCs, smart­
phones/tablets (Android 4.0 or higher) and iOS devices (iPhone, iPad) directly from the control panel. Further
information: see Page 36.
► The IR function integrated in the TEN° control panel makes it possible to control a wide range of different
infrared devices. Further information: see Page 40.
INFORMATION
Please note: The name of the mode for controlling household devices has been designated "I/O Module 1" at
delivery. The name can be individually modified by the qualified personnel prior to handover to the user.
85 Juvo
Use