Otto Bock Juvo, Instructions For Use Manual

Page: 109 / 124

Error message Error no. Content Cause Possible measure
Defective joystick
Orientation Error (None) Orientation error on
advanced
stability
module (ASM)
Defective advanced
stability
module
(ASM)
Contact specialist
dealer
ASM Disconnected (None) Advanced stability
module (ASM) dis­
connected from con­
troller
e.g. defective plug
connection, cable
break
Defective advanced
stability
module
(ASM)
Contact specialist
dealer
Gyro Disconnected (None) Electronic track sta­
biliser (gyro module)
disconnected
from
controller
e.g. defective cable
connection to con­
troller
Defective gyro mod­
ule Contact specialist
dealer
Gyro Prf Active (None) Electronic track sta­
biliser (gyro module)
is activated Electronic track sta­
biliser (gyro module)
is disrupted by the
movement of a differ­
ent means of trans­
portation (e.g. train,
ship) in standby
Defective gyro mod­
ule When driving/stand­
ing in means of trans­
portation, select the
"No Assist" driving
profile for safety reas­
ons
If error persists: con­
tact specialist dealer
1E0D Short circuit on
external on/off switch
Switch Short
1E0C Short circuit on
external profile/mode
switch
e.g. defective cable
connection to control
panel
Defective switch or
control panel Check cable connec­
tion and switching
function of the extern­
al switch
If error persists: con­
tact specialist dealer
7.4.4 Attendant control error overview
VR2 attendant control
Flashing LED Error/warning Cause Possible measure
Control unit fault Fault in the control unit Read error on the control panel and
take
corresponding action (see
"Wheelchair control unit error over­
view" table)
Attendant control fault Defective attendant control Switch off attendant control and turn
control panel off/on
Joystick error Attendant control joystick
not in home position when
the unit is turned on Switch off attendant control and move
joystick to home position before
switching the unit on
Switch control panel off/on
Communication error
between the attendant con­
trol (joystick) and the con­
trol panel/controller
Defective cable, loose plug
connection Check cabling / plug connections
R-Net attendant control
Flashing LED Error/warning Cause Possible measure
Control unit fault Fault in the control unit Read error on the control panel and
take
corresponding action (see
"Wheelchair control unit error over­
view" table)
109 Juvo
Maintenance and repair