Otto Bock Avantgarde Teen2 T, Instructions For Use Manual

Page: 23 / 32

10.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descriptions and instruc­
tions provided in this document. The manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthorised modification of the product.
10.2 Warranty
Further information on the warranty terms and conditions can be obtained from the qualified personnel that has fit­
ted this product or the manufacturer's service (see inside back cover for addresses).
10.3 Service life
Expected lifetime:
4 years
The design, manufacturing and requirements for the intended use of the product are based on the expected life­
time. These also include the requirements for maintenance, ensuring effectiveness and the safety of the product.
11 Technical data
INFORMATION
►
Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe­
cified – cannot be adjusted in the mm range but only in increments of approx.
0.5 cm
or
1 cm
.
► Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be
±10 mm and ±2°
.
INFORMATION
►
Some of the measurements indicated below are values that were theoretically determined.
► Note that not all adjustment possibilities can be used with all product versions. Furthermore, the adjustment
combinations are limited by the compact frame geometry.
► Technical changes and tolerances are reserved by the manufacturer.
General information
Avantgarde Teen 2
Max. load [kg] 90
Max. load with use in a vehicle for transporting persons
with reduced mobility [kg] 75
Weight [kg]
1)
(with 240 mm seat width, 4" caster wheels (soft casters),
22" standard rim, height-adjustable push handles)
Approx. 12.5
Transport weights [kg]
1)
;
(with 240 mm seat width, 4" caster wheels (soft casters),
22" standard rim, height-adjustable push handles)
Frame: 9.1
22" drive wheel: 1.7
Seat width [mm] 220–360
Seat depth [mm] 240–400
Max. overall height [mm]
(with rear seat height: 510 mm; back support height
400 mm; height-adjustable push handles with 240 mm
adjustment range) 1,250
Min. tyre pressure [bar]
2)
3.5
Permissible tyre type – drive wheels Pneumatic tyres, PU tyres
Permissible tyre type – caster wheels Solid rubber, soft caster
Steering range approx. [mm]
3)
(with 240 mm seat width, 4" caster wheels (soft casters),
22" standard rim, height-adjustable push handles)
870
Maximum permissible inclination [°]/[%]
4)5)6)
7/12.3
1)
The specified weights vary according to the selected options and model.
2)
Varies according to tyre option; see the marking on the tyre wall.
3)
Turning range/turning circle in accordance with ISO 7176-5, 8.11/8.12.
23 Avantgarde Teen2 T,
Avantgarde Teen2 VR
Technical data