3) Remove/replace/bolt down the pivot pin.
3.10.2.6 Replacing the Strut
1) Remove the desk side panel.
2) Release the strut lock.
3) Remove/replace the strut (see fig. 107; remove the arm rest pad if necessary).
4) Re-insert the strut into the desk side panel.
107
108
3.10.2.7 Replacing the Arm Rest Pad
1) Unscrew the 3 Phillips head screws on the bottom of the arm rest pad (see fig. 108).
2) Remove/replace the arm rest pad (see fig. 109).
3) If necessary, remove/replace/position the arm rest pad longitudinal adjustment (see fig. 110).
4) To reassemble, perform these steps in reverse order. Tighten all screws.
109
110
3.11 Assembly F: Caster Wheels
3.11.1 Changing the installation position of the caster head
The wheelbase can be changed by changing the installation position of the caster head.
1) Unscrew/remove the caster head mounting on the frame (2x size 6 Allen head screws) (see fig. 111).
2) Remove the caster head adapter and the caster head (see fig. 112).
3) To reassemble, perform these steps in reverse order. Tighten the screw connection evenly with
23 Nm
.
33
Avantgarde CV / CS / CLT
Service Work
Summary of Contents for Avantgarde CLT
Page 1: ...Service manual Avantgarde CV CS CLT...
Page 61: ...61 Avantgarde CV CS CLT...
Page 62: ...Avantgarde CV CS CLT 62...
