75
76
3.9.1.4 Retrofitting the "folding" push handles
1) Remove the old push handle.
2) Remove the back pad.
3) For adaptable back upholstery: Open/remove the uppermost strap.
4) Insert the folding push handle into the back tube and tighten the 2 size 5 Allen head screws (see fig. 77).
5) For adaptable back upholstery: Mount the uppermost strap on the push handle and secure with hook-and-loop
fastener (see fig. 78).
6) Put the back pad back on.
77
78
3.9.1.5 Replacing the hand grips
a) "Standard" push handle, "height-adjustable/removable" push handle
1) Carefully cut open the old hand grip (see fig. 79) and remove material residue from the back tube.
2) Clean the tube end with solvent.
3) Open the adhesive packaging and follow the instructions provided by the manufacturer of the adhesive. The
manufacturer recommends using a 2-component epoxy resin adhesive or cyanoacrylate adhesive.
4) Apply the adhesive to the grip opening of each hand grip. Apply the adhesive evenly around the grip opening,
or let it spread by evenly turning the grip, up to a depth of approx.
40 to 50 mm
.
5) Turn the hand grip slightly to slide it onto the tube up to the end of the handle and position it vertically on the
wheelchair. Observe the processing time.
NOTICE! Once the processing time (pot life) has expired, the adhesive is hardened and the push
handle can no longer be moved or adjusted.
6) Allow the adhesive to harden for approx.
24 h
before handing the wheelchair over to the user.
26
Service Work
Avantgarde CV / CS / CLT
Summary of Contents for Avantgarde CLT
Page 1: ...Service manual Avantgarde CV CS CLT...
Page 61: ...61 Avantgarde CV CS CLT...
Page 62: ...Avantgarde CV CS CLT 62...
