Ottobock | 11
1.3 Function
The vacuum connector has not thread (click connection). It is opened and
closed by pressing together two levers. It serves to conduct air from the
socket to the Harmony pump through a hose.
2 Components
2R119 Vacuum Connector (Fig. 1)
(1) Lower screw ring
(2) Upper screw ring
(3) Upper connector part
(4) Hose connector
(5) Vacuum forming dummy
(6) Lamination dummy
(7) 501S86=M5x12 Countersunk Head Screw
(8) 503S3 Screw
(9) Pin wrench
(10) Hose
3 Handling
The dummy provided is used during vacuum forming or lamination and al-
lows for precise fitting into the socket made of different materials. Please
always make sure that the full dummy surface rests on the plaster positive.
3.1 Setup
NOTICE
Risk of damage to the vacuum connector.
The vacuum connector is not
intended for the fixation of inner socket and frame socket. It has no holding
function. Attach the vacuum connector only to the flexible inner socket.
Summary of Contents for 2R119
Page 2: ...2 Ottobock 1 4 8 2 3 5 6 10 7 9 2 3 1 ...
Page 3: ...Ottobock 3 4 5 7 6 ...
Page 4: ...4 Ottobock 8 ...
Page 99: ...Ottobock 99 ...
