Otto Bock 1G6, Instructions For Use Manual

Page: 10 / 176

1 Product description
English
INFORMATION
Last update: 2017-04-12
►
Please read this document carefully before using the product.
►
Follow the safety instructions to avoid injuries and damage to the
product.
► Instruct the user in the proper and safe use of the product.
► Please keep this document in a safe place.
1.1 Construction and Function
The 1G6 lightweight cosmetic foot is suitable for use in both modular and
exoskeletal prostheses. The functional properties are achieved through a
specially designed sole contour and functional foam.
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.
2 Intended use
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compon­
ents based upon weight and mobility grades identifiable by our MOBIS clas­
sification information and which have appropriate modular connectors.
m°
kg
The product is recommended for mobility grade 1 (indoor walk­
er). Approved for a body weight of
max. 75 kg .
2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
10