Otto Bock 1E91 Runner, Instructions For Use Manual

Page: 14 / 252

1E91
• Only use prosthetic components approved for the respective sport
or a body weight of 150 kg.
1E93
• Only use prosthetic components approved for the respective sport
or a body weight of 100 kg.
2 Intended use
2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
• The maximum approved body weight is specified in the technical data
(see page 22).
The product is not suitable for the long jump or sports with a similar load on
the prosthesis.
1E91
This product is not suitable as an everyday prosthesis.
1E93
The product was developed for use in a children's prosthesis.
This product is
not suitable as an everyday prosthesis.
Approved for a body height up to max. 145 cm .
2.3 Environmental conditions
Storage and transport
Temperature range –20 °C to +60 °C (–4 °F to +140 °F), relative humidity 20 % to
90 %, no mechanical vibrations or impacts
Allowable environmental conditions
Temperature range:
–10 °C to +45 °C (14 °F to 113 °F)
Moisture: relative humidity: 20% to 90%, non-condensing
Chemicals/liquids:
fresh water as dripping water, occasional contact with salty air
(e.g. near the ocean)
Solids: dust
Prohibited environmental conditions
Chemicals/moisture:
salt water, perspiration, urine, acids, soapsuds, chlorine water
Solids:
dust in high concentrations (e.g. construction site), sand, highly hygroscopic
particles (e.g. talcum)
14