background image

CONGRATULATIONS! 

You’ve purchased the finest in natural lighting 

technology with your new OttLite

®

 product.

PRODUCT REGISTRATION FORM 

Please complete the enclosed Product Registration Form and return it 
today by mail, or register online by going to: OttLite.com/warranty

WARNING:

 To prevent electric shock, make sure the lamp is not plugged 

in until all steps are complete.

NOTE: THIS UNIT IS FULLY ASSEMBLED

1. 

Remove lamp from packing, placing lamp body base (A) flat on a steady 
surface.

2. 

Connect power adapter input (B) into connector (C) in the rear-bottom of 
the lamp.

3. 

Plug the power adapter (D) into a standard household 120V AC outlet. 

Note: Only use with the supplied power adapter to avoid damage 
or fire.

  

4. 

Turn the lamp ON/OFF by using power switch (E) located on top of base (A).

5. 

Touch switch “

M

” (F) to change the color temperature of the light. The 

lamp has 3 color modes.   

6. 

Adjust the brightness by touching the “

+

” (G), or the “

” (H) on the 

touch panel. 

7. 

To reposition the light, hold base (A) steady and grasp either lamp body 
(J) or shade (K) depending on needed adjustment. 

DO NOT FORCE 

the 

shade or lamp body outside allowable adjustable range as excessive 
adjustment may cause damage. 

SAFETY WARNING:

  

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, 

OR INJURY TO PERSONS

1. 

Turn lamp off and

 WAIT UNTIL LAMP HEAD IS COOL

 

before handling.

2. 

The LED panel might get hot after several hours of continuous use 

DO 

NOT

 place your hands directly on LED light panel.

3. 

Never use with an extension cord unless the plug can be fully inserted 
into the receptacles in the extension cord.

4. 

Do not alter the plug.

5. 

The lamp head included with this unit cannot be replaced by the consumer.

6. 

INDOOR USE ONLY.

NOTE:

 The important safety instructions appearing in this instruction sheet 

are not meant to cover all possible conditions and situations that may occur.  
It must be understood that common sense, caution, and care must be used 
with any electrical product.

CAUTION!

  

IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS 

DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS SERVICE 

AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. INDOOR USE ONLY.

CAUTION!

  

THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE; WHEN 

THE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED.

CAUTION:

 Any change or modification to product not expressly recognized 

by OttLite Technologies voids OttLite’s responsibility for proper function of 
product.

FCC PART 15 

Note: This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that the interference will not occur 
in a particular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the interference by one or more of the following 
measures:

•  

Reorient or relocate the receiving antenna.

•  

Increase the separation between the equipment and receiver.

•  

Connect the equipment into an outlet on a circuit different from that to which the  

    receiver is connected.

•  

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions:
    (1) this device may not cause harmful interference, and 
    (2) this device must accept any interference received, including interference that  
         may cause undesired operation.

CAN ICES-005 (B)/NMB-005 (B)

POWER ADAPTER SPECIFICATION:

Input: AC 100-240V, 50/60 Hz, 0.3A 
Output: 5V DC, 1.0A with a Male DC Plug

  

 

ENGLISH

 

Slimline LED Desk Lamp

A

C

Slimline LED Desk Lamp 

CS33600C     CS336G5C     CS33600C-SHPR     CS336G5C-SHPR

 

  

 

 

     K10FSE

INS220706 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

           

 

 

 

 

 

 

 

 

                             REV051922

K

F

E

G

H

DC

5V 1A

DC

5V 1A

B

D

+ –

J

Reviews: