Page
139
of
248
Tx Count
This option provides the count of good and bad transmissions. For a station that has made 19350 good
and 2 bad transmissions, the SHEF format would be “:YG 19350 :YH 2”.
Append Options Example
Here is an example of all the append options in a SHEF format using SEHF codes. The order of the values is
battery, lat/long, forward power, reflected power, station name, temperature, time (HHMMSS), serial
number, and transmission count:
:YB 11.99 :YN Small Creek :YD 172100 :SN 00001 :YG 19350 :YH 2
With SHEF codes disabled, the same append options look like so:
:BL 11.99 :NAME Small Creek :YD 172100 :SN 00001 :GOOD/BAD 19350/2
For append option details in other formats, please take a look at section
11.5
Telemetry Status
Telemetry status provides details for each type of transmission setup. The details can give valuable
insights into how each type of telemetry is performing.
11.5.1
Refresh
The t
elemetry status does will not update automatically. The “refresh” control retrieve
s current
information.
11.5.2
Clear Counts
This control clears the succeeded and failed counts. Sutron recommends clearing the counts during each
field visit.
Summary of Contents for SUTRON XLINK 100
Page 230: ...Page 230 of 248...
Page 247: ...Page 247 of 248...
