otometrics Madsen Xeta, Reference Manual, Page: 31 / 108

4.3 The Patient Responder indicator
When the patient presses the Patient Responder this is shown on the Stimulus bar, and a sound signal from the PC is heard
through the Monitor Speaker or Operator Headset. The sound signal is optional (
Tools
>
Options
>
Audiometry
>
General
>
Measurement, Misc
>
Audible patient response
).
Use the Configuration Wizard to select Single Responder or Dual Responder setup. See Configuring the Audiometry Mod-
ule ► 79 .
Single Responder setup
•
Green
Indicates that the patient is pressing the Patient
Responder.
Dual Responder setup
•
Red
Indicates that the patient is pressing the right
response button.
• Blue
Indicates that the patient is pressing the left
response button.
•
Red and blue
Indicates that the patient is pressing both response
buttons.
4.4 The Masking Assistant
If the Masking Assistant is enabled, it will at all times check for frequencies that may require testing with
masking. This also applies to old audiograms imported from NOAH or XML as long as a supported transducer
was stored with the data.
The Masking Assistant is a tool provided to help you with an indication that there may be frequencies where testing with
masking
1
is recommended.
1(Katz, J., Lezynski, J. (2002). Clinical Masking. In J. Katz, ed.,
Handbook of Clinical Audiology
, Williams and Wilkins, Bal-
timore.)
Otometrics - MADSEN Xeta 31
4 Navigating in the OTOsuite Audiometry Module