otometrics Madsen Xeta, Reference Manual

Page: 21 / 108

Restoring factory default settings
To restore factory default settings:
1. To access the Setup menu of MADSEN Xeta, press
Setup
.
When the Setup function is active, the Setup button flashes. Most other buttons are deactivated and you cannot run
any tests.
2. Turn the
Left level
knob to scroll through the parameter list.
3. Select Device settings ► 64 .
4. Press the
Reset
function key below the display.
5. Press Setup to exit.
Setting 1 and Setting 2 - customizing tests
Changing the setup
If you select a different function when you have selected a user-defined test, the
Setting
button will flash to indicate the
change.
• To return to your original setting, press the
Setting
button briefly.
• To add this new function to your setup, press and hold the
Setting
button until you hear a beep.
Using a user-defined test
1. Press Setting 1 (or Setting 2 ) .
2. You can now perform a test based on the settings selected in
Setting 1
(or
Setting 2
) .
Automatic reload of the last used settings
MADSEN Xeta is optimized for testing patient after patient in the same consistent manner. To support this, MADSEN Xeta
remembers the settings you used for testing the previous patient, i.e. the settings selected when the first threshold was
stored. If
Setting 1
or
Setting 2
was used, that setting will automatically be reloaded and used for the next patient. Set-
tings are reloaded whenever you select
New Patient
, change patient using the right or left arrows, and when you switch
the power off and back on.
MADSEN Xeta has a third configurable setting. If neither Setting 1 or Setting 2 is selected (you can de-select Setting 1 or
Setting 2 by pressing the active Setting button twice) the audiometer uses the third setting. The third setting is defined as
the settings present when storing the first threshold for a patient while neither Setting 1 or Setting 2 were selected. The
third setting is also remembered and reloaded from patient to patient.
3.2.10 Change Ear (L <--> R)
• Press this button to switch between testing the left and right ear.
Note
• Automatic tests automatically switch ear.
Otometrics - MADSEN Xeta 21
3 Overview of MADSEN Xeta