otometrics madsen itera ii, Reference Manual

Page: 12 / 134

Printing
• See the OTOsuiteUser Guide.
2.3 Customizing your setup
With Itera II you can quickly and easily customize your test sequences for maximum efficiency.
Changing the setup
Make the changes you want in the setup of Itera II and save these changes in the specific test setup.
Example
1. Set dB STEP to 1 dB (press button 1 in the dB STEP column).
2. Press
SETUP
twice to enter setup mode.
3. Turn the Left dB LEVEL knob until SAVE TEST SETUP is shown on the display.
4. Press
STORE
.
5. Turn Itera II off and then on again. It now remembers your preferred settings.
Shortcuts
A number of functions in Itera II can be activated by a shortcut so that you just have to press and hold the appropriate but-
ton and turn the knob.
For a full list of shortcuts, see Temporary changes in the setup
►
88 .
Example
1. Press the
SPEECH
button to select Speech mode.
2. Press
MIC
to select microphone.
3. Press and hold
MIC
while you turn the
Right level
knob. You will then adjust the sensitivity of this microphone.
12 Otometrics - MADSEN Itera II
2 Getting started with MADSEN Itera II and the OTOsuite Audiometry Module