otometrics MADSEN Alpha OAE Page 60 User Manual Download

Page: 60 / 68

App. 3.3.15

Standards

Otoacoustic emissions:

EN 60645-6, Type 2

Patient Safety:

•

EN 60601-1, Internally Powered, Type BF, IPXO

•

U2601-1; CAN/CSA-C22.2 NO 601.1-90,

•

IEC 60601-2-26

•

IEC 60601-2-40

EMC:

EN 60601-1-2

App. 3.4

Power supply and battery

Device

Supply voltage:

Nom. 3.70 V,
Max. 4.20 V,
Min. 3.20 V (measured with device load)

Maximum battery power con-
sumption:

1.5 W while measuring

Estimated battery life:

8 hours of continuous use (based on a typical use scenario. Actual use can influ-
ence the battery life time.)

Battery level indicator:

5-step battery level indicator

Battery

Caution

•

Use only rechargeable battery supplied by GN Otometrics A/S, Part no. 8-73-02400. Use of any other

battery may present a risk of fire or explosion.

Battery type:

Rechargeable Li-ion 3.7 V/1800 mAh (6.7 Wh), fully charged

App. 3.5

1077 docking station

The docking station is an optional accessory.

App. 3.5.1

Printer/modem interface

Interface type:

RS232

Connector type:

6-pol Mini Din

Otometrics - MADSEN Alpha OAE

App. 3 Technical Specifications

Summary of Contents for MADSEN Alpha OAE





































































Search results

Summary of Contents for MADSEN Alpha OAE

Reviews:

Related manuals for MADSEN Alpha OAE

Brands by name

Popular brands

otometrics MADSEN Alpha OAE, User Manual

Search results

Summary of Contents for MADSEN Alpha OAE

Reviews:

Related manuals for MADSEN Alpha OAE

Brands by name

Popular brands