otometrics ICS Impulse USB User Manual Download Page 5

Page: 5 / 128

System startup

1. Switch on the computer.

2. Double-click the OTOsuite Vestibular icon.

Note

•

To extend the life of the components in the goggles, it is best to close the software when not in use. If the soft-

ware is left open, the fan will continue to run and cool the goggles.

Logging in

Note

•

An Administrator user name and password are provided with a new installation of OTOsuite Vestibular. DO

NOT delete the user name or password from the login screen until at least one new user name with password has been
added. Ensure that at least one user has administrator privileges. For information on how to add new users, refer
to

Set up a new user

►

109

At the login screen

Note

•

The password is case sensitive.

1. Enter your user name.

2. Enter your password and click

OK.

Otometrics - ICS Impulse USB

User Guide

Summary of Contents for ICS Impulse USB

































































































































Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands

otometrics ICS Impulse USB, User Manual

Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands