background image

Do not twist, bend, or damage the cable. Accidental damage and incorrect hand-
ling can have a negative effect on the functionality of the device. Contact your
supplier for advice.

8

Service, cleaning and maintenance

Service

For the sake of safety and in order not to void the warranty, service and repair of elec-
tro-medical equipment should be carried out only by the equipment manufacturer or
by service personnel at authorized workshops. In case of any defects, make a detailed
description of the defect(s) and contact your supplier. Do not use a defective device.

8.1

Cleaning

Always follow any established infection control procedures for the setting in which
you are working.

Caution

Keep the unit away from liquids. Do not allow moisture inside the

unit. Moisture inside the unit can damage the instrument and it may result in a
risk of electrical shock to the user or patient.

Clean the headband padding and the ear pads only with the cleansing agents recom-
mended below. Follow the instructions from the manufacturer of the cleansing
agent.

Caution

Do not spray liquids directly on the product. Use a soft cloth

dampened with the cleansing agent or disinfectant.

Otometrics - HDA 300

7

Summary of Contents for HDA 300













Reviews: