otometrics AURICAL Aud, Reference Manual

Page: 51 / 136

If you do not use any predefined tests, you must select all settings and speech material manually. Rows will then auto-
matically be added and you retain them in the table by storing the result.
2.10.2 Speech editing options - tabular view
When you right-click any of the rows in tabular view, the fol-
lowing options appear:
Options
Store Stores the dB level(s) currently displayed to the field that is highlighted.
Insert No Response NR will replace the stimulus level for the selected speech test.
Insert Did Not Test DNT will replace the stimulus level for the selected speech test.
Insert Could Not Test CNT will replace the stimulus level for the selected speech test.
Delete Measurement Deletes an existing measurement.
Entry fields Enables you to enter results in the selected field.
• When you have typed in the desired data, confirm by pressing
Enter
or cancel by pressing
Esc
.
Configure
See
Creating and editing the speech test table
►
50
.
Editing a row
Click on the data you wish to edit and use the right-click menu to change the value.
Deleting a row
Right-click on the field you wish to delete and select
Delete Measurement
.
Sorting the tabular speech data
You can sort your data either by ear or by its sequential number depending on your needs. Usually, the sequential sorting
is preferred during data collection when you perform one test type at a time. Sorting by ear is sometimes preferred when
you compare the ears when analyzing the complete results.
• To sort data by their sequential number, click the number field in the table header (marked with the #symbol).
Otometrics - AURICAL Aud 51
2 Navigating in the OTOsuite Audiometry Module