otometrics AURICAL Aud Reference Manual Download Page 20

Page: 20 / 136

The Speech/Aided Speech Control Panel

Quick Select - Speech

2.5.1

Quick Select - Tone

Click the

Control Panel

icon in the toolbar to activate the Control Panel.

Quick Select

Click to select the options you wish to use. You can customize the symbols to suit your purposes: See

Curves and sym-

bols selection

►

(

ight,

inaural,

eft)

Click to select whether your transducer selections will be routed to the right, left,
or both right and left transducers.

This will also reflect on how the results are stored:
•

Left symbols will be stored on the left-ear audiogram (or on the combined audi-
ogram)

•

Right symbols will be stored on the right-ear audiogram (or on the combined
audiogram)

•

Binaural symbols will be stored on both audiograms (or once on the combined
audiogram)

(

onduction)

Mask

Presents the stimulus and/or masking using the selected AC transducer.

(

one

onduction)

Mask

Presents the stimulus and/or masking through the bone oscillator.

Otometrics - AURICAL Aud

2 Navigating in the OTOsuite Audiometry Module

Summary of Contents for AURICAL Aud









































































































































Search results

Summary of Contents for AURICAL Aud

Reviews:

Brands by name

Popular brands

otometrics AURICAL Aud, Reference Manual

Search results

Summary of Contents for AURICAL Aud

Reviews:

Brands by name

Popular brands