otometrics ABR Screener User Manual Download Page 58

Page: 58 / 108

5.11

The Test View screen

The

Test View

screen shows the tests that have been made on a particular patient.

The tests are listed according to date, with the most recent tests at the top of the list.

1. To view more tests, if available, press the arrow buttons to scroll up or down in

the list.

The

Test View

screen shows you information about

–

The type of tests that were made.

–

On which ear the test was made.

–

The date and time on which the test was made.

The test results

•

Pass/Clear Response

•

Refer/No Clear Response

•

Incomplete

2. To view or print the individual test results, press the result icon. This will take you

to a test result screen displaying the test you wish to view or print.

For a description of the individual test result types, see:

–

–

–

3. If you wish to view comments to a test result, press the

Comments

button in the

specific test results screen.

Otometrics - MADSEN AccuScreen

5 Testing with AccuScreen

Summary of Contents for ABR Screener













































































































Search results

Summary of Contents for ABR Screener

Reviews:

Related manuals for ABR Screener

Brands by name

Popular brands

otometrics ABR Screener, User Manual

Search results

Summary of Contents for ABR Screener

Reviews:

Related manuals for ABR Screener

Brands by name

Popular brands