manualshive.com logo in svg

Otodynamics Otoport Advance, User Manual

Share
Download
Otodynamics Otoport Advance User Manual Download Page 41

41

 

Some Otoport models only allow a single probe connection to probe socket 

one.  In this case, one probe socket will be blocked.

3.4.2

 

Connecting the electrodes

 

The Otoport OAE+ABR is supplied with an electrode cable loom featuring 

snap stud connectors for electrode attachment. Alternatively, any wired 

electrodes that are terminated with 1.5mm ‘Touchproof’ DIN 42-802 

connectors may be used. 

 

Carefully align the electrode connector plug with the appropriate electrode 

socket (observe colour coding) and then push in firmly.

 

To disconnect the electrode connector, grasp the plug body and pull 

straight out from the socket.

 

Important note: 

Do not unplug by pulling on the electrode cable as this may 

damage the cable/plug assembly.

Getting started

Otoport OAE+ABR

User Manual for Advance and Screener

Summary of Contents for Otoport Advance









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands