manualshive.com logo in svg

Otodynamics Otoport Advance, User Manual

Share
Download
Otodynamics Otoport Advance User Manual Download Page 178

CHAPTER SEVENTEEN

Test set-up

178

17.8.3

  ABR Automation

   

Auto Start 

 If 

Auto Start

 is ON then the ABR test will proceed from the Impedance 

Check screen to data collection (autostart) without any action from the 

tester if test conditions are good.   

 If 

Auto Start 

is OFF the tester determines when to proceed from 

Impedance Check to data collection (manual start).

 

Auto Stop 

 The 

Auto Stop 

setting controls whether the test automatically stops when 

the pass criteria are met. If Stop is turned OFF, the test will run for longer, 

but the ABR levels will be more accurately measured. If Stop is ON when 

screening, the test will be as short as possible. 

Test set-up

Summary of Contents for Otoport Advance









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands