manualshive.com logo in svg

Otodynamics DP Clinical, User Manual, Page: 62 / 228

Share
Download
Otodynamics DP Clinical User Manual Download Page 62

CHAPTER SEVEN

OAE test procedure

62

OAE test procedure

 

The default 

Clinical 

modes are 

TEOAE

, 

DP High

, 

DP Low

 and 

DP 12 

Frequency

.

 

The default 

Screen 

modes are 

TEOAE

, 

DP Low 

and 

ABRscreen.

  

Small icons indicate whether 

Screen

 or 

Clinical

 mode is in use.  The 

available modes can be altered (see chapter 

15

 

Configuration

).

 

Link-Test

, 

Utilities 

and the

 

Work List 

are always available in both modes.

 

The 

DP High 

and 

DP Low 

modes allow testing at half-octave points at 

different stimulus levels.  

DP 12 Freq 

tests from 1-8kHz at quarter octave 

points.

 

Note:

Configure the modes available in the 

Config

 area (see chapter 

15

 

Configuration

).  Modes turned 

Off

 here will not be available.

 

The banner at the top of the first four main menu screens shows the 

current test stimulus.  For the DP modes, the numbers by the mode name 

represent the amplitude of the primary tones L1 and L2.

 

A test may be started from one of these screens by selecting 

Last

 or 

Test

.

 

For guidance on using the 

Work List

, see chapter

 

13

.

 

A test may also be started from the 

Patient

 details screen in the 

Record

 

area (see chapter 

14

).

 

You will not be able to start a test if the Otoport is connected to a PC or 

power supply.  

Summary of Contents for DP Clinical





































































































































































































































Reviews:

No comments