CHAPTER FOUR
Switching on
48
Switching on
4.3
Mode select
The Otoport DP+TE has two distinct operating modes:
Screen
and
Clinical
.
The Screen mode is designed to run tests in the shortest possible time and
to stop automatically when there is conclusive evidence that a response is
present.
The Clinical mode is designed to run longer, more detailed tests that will
run until the user is satisfied with the quality of the data.
Select the mode which meets your requirements.
Both modes are fully configurable and either can be disabled (see chapter
15
Configuration
).
To return to the
Mode Select
screen, enter and then exit the
Config
area
(see chapter
14
Utilities
) or turn the Otoport off and on again.
This screen is not shown if one of the modes is disabled.