manualshive.com logo in svg

Otodynamics DP Clinical, User Manual, Page: 147 / 228

Share
Download
Otodynamics DP Clinical User Manual Download Page 147

Otoport OAE+ABR

User Manual for Otoport DP+TE model

147

Printing

 

Bluetooth download requires that Otolink software is installed and that your 

Otoport is paired with your PC.  The password for pairing is 4679.  See 

your Otolink manual for full instructions. 

 

When the connection to the PC is ready to send data the 

PC-Load 

text on 

the Otoport screen is green:

  

If the connection is not complete then the 

PC-Load 

text on the Otoport 

screen is black.

 

Bluetooth printing is described throughout this chapter.

 

Bluetooth is disabled when the Otoport is connected to a power supply 

(non US models only).

16.2

  Wired downloading

 

Wired download is available at any time when a test is not in progress and 

the Otoport database is not open.  See the Otolink manual for details.

Summary of Contents for DP Clinical





































































































































































































































Reviews:

No comments