CHAPTER FIFTEEN
Configuration
118
Configuration
15.2.3
General
Use the arrow keys to navigate and choose between the setup options
(described below).
Select
Save
to apply the settings changes you have made and return to the
Configuration
screen.
Select
Cancel
to discard changes made to settings and return to the
Configuration
screen.
Display
If
dBSPL
is selected a bar chart showing signal and noise at each
frequency is displayed during testing.
If
Circles
is selected, each circle represents the SNR recorded at a
particular frequency.
Whichever setting is chosen as default, the other option is available during
the test as a side screen, accessed using the left and right arrow keys.
The
Circles
display is not available in
DP 12 Freq
mode.