Otoport OAE+ABR
User Manual for Otoport DP+TE model
117
Configuration
15.2
Test settings
15.2.1
Mode select
The test settings are divided into
Screen
and
Clinical
modes. The default
settings for each are listed at the end of this section (
15.2.7
Test Mode
Defaults
).
Either
Clinical
or
Screen
modes may be turned off. If they are turned off
then these modes will not be available for test. To turn a mode off use the
up or down arrow keys to select
Screen
or
Clinical
then the left or right
keys to display
Off
.
Select
Edit
to change the settings for either mode.
Select
Save
to keep your changes or
Cancel
to discard them.
15.2.2
Clinical and Screen settings
The test settings area for each mode is divided into
General
settings,
which affect all tests, and settings that affect only OAE or ABR tests. Stop
criteria are dependent on both the general and mode specific settings.
Clinical
and
Screen
modes have identical set up options but the defaults
for each are optimised for different uses.