English - 16 -
·
Select the processing time by turning the timer clockwise.
The machine will now start.
·
Processing time to grind gold and silver: 1-3 hours
·
Processing time to grind platinum, titanium and
stainless steel: 3-6 hours
·
The machine will switch off automatically after the time set
has expired.
·
Unload the work-container completely and separate the
white chips from the work-pieces.
·
Clean the work-pieces in an ultrasonic bath for about 2-3
min. If you than want to process them immediately in a dry pol-
ishing process like in the
Eco-mini „dry“
, they do not have to
be dried.
7.4.2. How to process emerypaper-treated jewelry
When you want to process cast emerypaper-treated jewelry or
chains, the wet-grinding needs to be done in only one process-
ing-step:
·
Fill approximately 1,5 liters white plastic chips KX 10 and PX
10 (cones and pyramids mixed 1:1) into the work-container.
·
Only use cones KX 10 when grinding jewelry with soft pre-
cious stones.
·
Select the processing time by turning the timer clockwise.
The machine will now start.
·
Processing time to grind gold and silver: 3-5 hours
·
Processing time to grind platinum, titanium and
stainless steel: 4-12 hours
