SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
1-4
Figure 1-4 Connection of the Speedport Entry 2i to a PSTN or a broadband telephone line.
1.
Connect the telephone adapter (RJ-11, 1 to 2 ‘Y’ adapter) to the telephone outlet.
2.
A.
Connect one side of the
blue
telephone
cable to one of the ports of the RJ-11 ‘Y’ adapter and the
other side to the
blue
port of the splitter with the indication
“LINE”.
B.
Following, connect the cable of the telephone set with the other port of the RJ-11 ‘Y’ adapter by
placing a
filter
in between.
3.
Α
.
Connect one side of the
gray
telephone cable to the gray port of the splitter with the indication
“MODEM”
and the other side to the gray port of the Speedport Entry 2i with the indication
“DSL”
.
B.
Following, connect one side of the
black
telephone cable to the black port of the splitter with the
indication
“Phone”
and the other side of the cable to the black port of the Speedport Entry 2i
with the indication
“Phone 2”
.
4.
Use the
yellow
ETHERNET cable to connect the ETHERNET port of your computer to one of the first
yellow ports of the Speedport Entry 2i with the indications
LAN1
,
LAN2
or
LAN3
.
The port with the
purple
indication (
STB
) is used exclusively for the connection of the codec which is
required for the OTE TV service.
5.
Connect the power supply adapter to the POWER jacket of Speedport Entry 2i and following,
connect it to the power plug. The LEDs for Power, DSL, Online, Telephony, Service and WLAN will
flash instantly.
After the conversion of your analog telephone line to a broadband telephone line, you may connect
an additional telephone set (e.g. telephone, fax) to the black port of Speedport Entry 2i with the
indication
“Phone 1
”, without using a filter.
6.
To connect additional telephone sets to other telephone plugs, you must insert a filter. Connect the
telephone set to the filter and the filter to the telephone plug. Only one filter is contained in the
packing box. In case you need more filters, you will have to purchase them from a
telecommunications equipment shop.
Note
:
If your telephone network is connected to a device such as an alarm, private telephone switch
(PBX) etc., you will have to use an extra filter or splitter. You are kindly requested to ask for help from
a specialized installation
team.
