Function description
GB
56
CPTX 400-2/400-2w/450-2w Synergy
10
Voltmeter
Indicator of the actual/nominal welding voltage.
In Addition: Time
In Addition: Display of the wire speed correction (%)
11
Welding current display
Indicator of the actual/nominal welding current.
When the device is switched on, the set welding wire
speed is displayed for 2 seconds.
12
Yellow LED
Displays the thermostat protection.
13
Green LED
LED: External settings are enabled!
Set the correction of the welding wire feed
speed by ± 40% (Program Mode)
Adjusting the welding wire feed speed
from 0 to 20 m / min. (Manual mode)
14
Potentiometer
Set the correction of the welding wire feed
speed by ± 40% (Program Mode)
Adjusting the welding wire feed speed
from 0 to 20 m / min. (Manual mode)
Note: If the green LED is on (Pos. 12), the
external setting is enabled and the
potentiometer (Pos.14)
can’t be served!
6.1 Choice of the welding mode
Function
Manual Settings
Synergic program
2-stroke mode
LED:
L1
LED:
L3 + L1
4-stroke mode
LED:
L2
LED:
L3 + L2
