1.
Apply sock, ensuring there are
no wrinkles. Unfasten the straps,
remove the front shell and open
the liner. The insole should be
placed inside the liner with the
hexplugs facing down and the
light grey layer facing up.
2.
While seated, place your foot
inside the walker ensuring that
the heel is comfortably positioned
at the back and wrap the liner
securely around the foot and leg
and secure with the Velcro tabs.
3.
Place the front shell back onto
the front of the liner. Then
fasten the ankle strap first (A)
followed by the foot strap (B)
and then the calf strap (C).
4.
Use the holes at the back of
the walker to confirm that the
ankle is centered and that the
heel is not pressed against
the back of the walker.
5.
Inflate the air chambers by
pressing “+” on the air bulb,
until the walker is snug. The
air system is designed with a
feature to prevent over-inflation.
6.
Your clinician may require that a
compliance strap is placed around
the walker to inhibit removal. The
strap should be placed through
the strap guide in the front
shell. This strap should only be
removed in case of emergency or
when directed by your clinician.
REBOUND
®
DIABETIC
WALKER
Fitting
Instructions
Please follow the fitting
instructions included here and/
or contact your clinician in case
of questions.
