OSS OSS-PCIE-4UV-5slot, User Manual

Page: 58 / 98

One Stop Systems
4U Value 5slot G3 Expansion Unit 58
8 General & Other Technical Information
8.1 Target and Host cards
Host adapter (aka: HIB - Host Interface Board)
The host adapter (aka: Host Interface card)is installed into the host computer’s PCIe x16 slot. The host cable adapter (Part # OSS-PCIe-HIB38-
x16-H) allows communication between a processor and an I/O point.
Target adapter (aka: Target Card, Expansion Interface Card)
The target card(Part# OSS-PCIe-HIB38-x16-T) fits into an OSS custom slot backplane and extends the PCIe bus to a single add-in board via a PCIe
x16 cable. The “Target Card” can only be installed in a designated/ specific slot on the backplane.
8.1.1 Specifications
Form Factor PCIe half card
Operating Temperature 0˚C to +50˚C environment.
Storage Temperature -40˚C to 85˚C
Operating Humidity 10% to 90% relative humidity non-condensing
Storage Humidity 5% to 95% relative humidity non-condensing
Power 15W
Connectors
PCIe x16 cable connector
Industry Specifications • PCIe External Cabling Specification, Rev. 2.0
• PCI Express™ Card Electromechanical
Specification, Rev. 3.0
• PCI Express ® Base Specification, Rev. 3.0
PCB PCI Express add-in card standard
PCIe x16 cable
PCB thickness .063 +/-0.008 inch (1.6 +/- 0.2mm)
Mounting holes for face plate
Switch Broadcom PEX8733
Bracket • Standard and low profile brackets available
• Two LEDs on bracket
Agency Compliance • FCC Class A
• CE
• RoHS