One Stop Systems
4U Value 5slot G3 Expansion Unit
44
6.3
Installation of GPU
6.3.1 Before you begin
A double-wide GPU cover two slots. When installing double-wide or dual-width GPUs you must begin placing the GPU in the far right end of
the backplane (looking from the rear). This will allow you to see the slot location and align the GPU connector easily on top of the slot.
There are tiny components that are mounted above the gold-finger connector of the K80 and some GPUs, see pictures
below. When these components are broken off or become detached from the GPU board, your K80 or GPU will be
inoperable.
Be careful and cautious when plugging in a GPU into a PCIe slot. Failure to align the GPU on the slot can damage one of the components. See
picture below as an example of a detached / damaged components.
To avoid damaging these components, we strictly recommend installing the GPU card starting in the far right end of the backplane (looking
from the rear).
Summary of Contents for OSS-PCIE-4UV-5slot
