
Media Pixel Ribbon DMX Outdoor
Flat
Mounting Guide
www.traxontechnologies.com | www.osram.us/traxon
©2021 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Mounting Guide
09/21 V1.1
1 of 4
Do and Don't Do
DO NOT
twist Media Pixel Ribbon.
Damage will be caused to the internal circuity.
Non-Bendable Length of 0.79”/20 mm near the
connector end or near the ribbon cable entry
MUST
be adhered to.
Min.
Bending Radius for Ribbon body: 3.94”/100 mm
Min.
Bending Radius for cable: 1.18”/30mm
0.79”/20 mm
≥ 3.94”/100mm
≥1.18”/30mm
DO NOT
twist Media Pixel Ribbon.
Damage will be caused to the internal circuity.
Non-Bendable Length of 0.79”/20 mm near the
connector end or near the ribbon cable entry
MUST
be adhered to.
Min.
Bending Radius for Ribbon body: 3.94”/100 mm
Min.
Bending Radius for cable: 1.18”/30mm
0.79”/20 mm
≥ 3.94”/100mm
≥1.18”/30mm
• Do not connect or disconnect the LED strip when the circuit is powered.
• Do not connect the LED strip to the power supply while it is in the packing.
• Do not connect this light to another manufacturer’s product.
• Do not press on the LEDs and components to avoid physical damage.
• Interconnection shall be made only by the use of the supplied connectors. All open ends must be sealed-off before use.
• Please read the installation guide carefully for detailed installation planning.
Safety Information
Dimensions
2.32”/59 mm
11.81”±0.59”/
300±15 mm
L
2.20”/56 mm
φ
0.71”/18 mm
0.43”/11 mm
0.68”/17.2 mm
0.56”/14.2 mm
0.20”/5 mm
φ
0.75”/19 mm
0.31”/8 mm
0.79”/20 mm
0.59”/15 mm
RB CONNECTOR ENDCAP 120OHMIP67 (AM400870055)
59 ± 0.5 mm
RB 5PIN STARTER CABLE 1M IP67 (AM400840055)
RB 5PIN STARTER CABLE 3M IP67 (AM400850055)
16.8 mm
56 ± 0.5 mm
1000 or 3000 +/- 20mm
φ
7.8±0.2 mm
RB RJ45 STARTER Y-CABLE IP67 (AM401000055)
300 ± 20 mm
59.2 ± 1 mm
47 ± 1 mm
150 ± 10 mm
42.8 ± 1 mm
56 ± 0.5 mm
φ
6 mm
φ
7.2 mm
φ
19.6 mm
φ
18 mm
φ
6 mm
16.8 mm
RB 5PIN POWER INJ Y-CABLE IP67 (AM400990055)
16.8 mm
56 ± 0.5 mm
150 ± 10 mm
300 ± 20 mm
47 ± 1 mm
φ
7.2 mm
φ
6 mm
59.2 ± 1 mm
59 ± 0.5 mm
φ
18 mm
48 mm
39 mm
CONN. 1
CONN. 3
CONN. 2
CONN. 1
CONN. 3
CONN. 4
CONN. 3
CONN. 1
CONN. 2
CONN. 3
CONN. 1
CONN. 4
48 mm
Model
Max. Ribbon length with
single power feed
Actual product length with
endcap at 2-ends, L
RGB+W & RGB
315”
/
8000 mm
315” +0.8”/8000 + 20 mm
DW & W
393.7”/10000 mm
393.7” + 0.8”/10000 + 20 mm
Wire#
Description
Color
1
Address(PI)
Green
2
V-
Black
3
DMX+
Yellow
4
V+
Red
5
DMX-
Blue
Remark:
For other customized lengths (in multiples of 3.94” / 100 mm), the actual product length would be customized 0.79" / + 20mm.
CONN. 1
CONN. 1
11.81”±0.59”/
300±15 mm
Remark:
For other customized lengths (in multiples of 3.94” / 100 mm), the actual product length would be customized 0.78" / + 20mm.
Model
Max. Ribbon length with single
p
ower feed
Actual product length with endcap
at 2 -ends, L
RGB+W
26.2’ / 8 m (CE)
20’ / 6.1 m (ETL)
26.2’+0.8” / 8 m+20 mm (CE)
20’+0.8” / 6.1 m+20 mm (ETL)
RGB
26.2’ / 8 m (CE, ETL)
26.2’+0.8” / 8 m+20 mm (CE, ETL)
DW & W
32.8’ / 10 m
(CE)
30.2’ / 9.2 m (ETL)
32.8’+0.8” / 10 m+20 mm
(CE)
30.2’+0.8”
/ 9.2 m+20 mm (ETL)