ProPoint Sconce
Mounting Guide
www.traxontechnologies.com | www.osram.us/traxon
©2021 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Mounting Guide
02/21 V1.0
1 of 3
Tilt Adjustment Range
Data Cable Length 72.00 in [1828.0 mm]
Data Cable Diameter 0.325 in [8.25 mm]
Power Cable Length 72.00 in [1828.0 mm]
Power Cable Diameter 0.315 in [8.25 mm]
90°
0.31 in [8.0 mm]
6mm hex key required
to adjust fixture angle
(available from Traxon)
1.20 in [30.5 mm]
0.12 in [3.0 mm]
4.78 in [121.4 mm]
4.14 in [105.1 mm]
4.88 in [124.0 mm]
6.00 in [152.4 mm]
ø0.37 in [ø9.5 mm]
ø0.21 in [ø5.4 mm]
0.43 in [11.0 mm]
0.25 in [6.4 mm]
1.10 in [28.0 mm]
2.20 in [56.0 mm]
Data Cable Length 72.00 in [1828.0 mm]
Data Cable Diameter 0.325 in [8.25 mm]
Power Cable Length 72.00 in [1828.0 mm]
Power Cable Diameter 0.315 in [8.25 mm]
0.31 in [8.0 mm]
Tilt Adjustment Range
90°
ø0.37 in [ø9.5 mm]
ø0.21 in [ø5.4 mm]
0.59 in [15.0 mm]
0.25 in [6.4 mm]
1.81 in [46.0 mm]
3.62 in [92.0 mm]
5.75 in [146.0 mm]
1.20 in [30.5 mm]
0.12 in [3.0 mm]
4.82 in [122.5 mm]
4.13 in [104.9 mm]
7.50 in [190.4 mm]
6mm hex key required
to adjust fixture angle
(available from Traxon)
6mm hex key required
to adjust fixture angle
(available from Traxon)
Data Cable Length 72.00 in [1828.0 mm]
Data Cable Diameter 0.325 in [8.25 mm]
Power Cable Length 72.00 in [1828.0 mm]
Power Cable Diameter 0.315 in [8.25 mm]
7.45 in [189.2 mm]
5.70 in [144.9 mm]
1.28 in [32.5 mm]
0.12 in [3.0 mm]
4.32 in [109.8 mm]
ø0.37 in [ø9.5 mm]
ø0.21 in [ø5.4 mm]
0.83 in [21.0 mm]
0.25 in [6.4 mm]
2.05 in [52.0 mm]
4.09 in [103.9 mm]
0.31 in [8.0 mm]
9.32 in [236.8 mm]
Tilt Adjustment Range
90°
ProPoint Sconce S
ProPoint Sconce M
ProPoint Sconce L
1A
Wall mounting with standard bracket
Place the mounting bracket on the wall, align the holes
and mark them and then use an electric drill to make 3
holes for installing M6 expansion screws.
After aligning the mounting bracket with the 3 holes
made above, tighten and fix it with 3 M6 expansion
screws.
