OSRAM GmbH
Kunden Service Center
Customer-Service-Center (CSC)
Steinerne Furt 62
86167 Augsburg
Germany
Tel : +49 (0) 1803 677 - 200
(kostenpflichtig / charges apply)
Fax.: +49 (0) 1803 677 - 202
www.osram.com
www.osram.de
40083214100788
4008321410078
Page 1 of 4
Motion detector
Fitting instructions
VI 2009
HIGH-BAY_ma0906en_we1.01.indd
HIGH BAY
D
E
B
A
C
Description
Purpose and application
The HIGH BAY motion detector detects the movements of
people and vehicles, such as fork lifts.
The sensor is attached to ceilings and is ideal for mounting at
great heights and for wide detection areas. The unit is mounted
directly in a dry lining box or using the „Mounting Adapter“,
optionally available from OSRAM, to ensure that the installation
conforms to the CE guidelines.
The HIGH BAY motion detector can be connected to any control
component with a floating input that is designed for permanent
contact (switch).
Function
The motion detector detects motion within a detection area of
360° and switches on the connected luminaires when motion is
registered. When motion is no longer registered, the luminaires
switch off after an adjustable delay period.
Design
The sensor is made up of the following components:
•
Housing (A)
•
Connection cable (B):
–
L: phase (black)
– N: neutral conductor (blue)
–
Floating switch contact (2x white)
• Motion sensor (C)
• Button for setting the delay (D)
• LED (E)
Installation
Safety instructions
The motion detector must only be installed and put into opera
-
tion by a qualified electrician. The applicable safety regulations
and accident prevention regulations must be observed.
WARNING!
Exposed, live cables or damaged housing.
Danger of electric shock!
• Only work on the motion detector when it is
de-energised.
CAUTION!
Destruction of the motion detector and other
devices through incorrect
mounting!
• Adhere to the connection diagram.
• Do not exceed the maximum line length.
• Do not route sensor lines together with power
supply or lamp lines.
