www.traxontechnologies.com
©2021 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
V1.0 10/21
14 of 27
NOTE: Any water ingress incurred due to improper installation of cable connectors
or Waterproof Quick Lock End Caps will not be covered under warranty by Traxon
Technologies.
Be sure not to compress the IN/OUT cables.
NOTE: To keep LED pitch consistent and allow for thermal expansion, be sure to keep a
minimum distance of 4mm (0.16”) between consecutive ARCHISHAPE
®
Media Tube (see
below diagram).
FIG.9: Keep minimum distance between fixtures
To maintain consistent LED pitch and to allow for thermal expansion for Tubes.
End Cap Seal on Last Tube
>4mm
3. The first tube of the daisy-chain group has to be connected to the control system via
Waterproof Junction Box (not included).Starter cables, Data and Power cables, and
video fiber optic cables have to be installed through conduits.
4. Set up the control system indoors as detailed in the System Diagram and connect to the
ARCHISHAPE
®
Media Tube outside. Start up each unit and verify correct function.
