www.traxontechnologies.com
©2021 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
V1.0 10/21
10 of 27
2.2 Pre-Installation Checks
2.2.1
Installation Checklist
1. Prepare cables and all necessary accessories (Waterproof Quick Lock End Caps etc).
2. Perform functional check of the ARCHISHAPE
®
Media Tube. Take care not to damage
cables/connectors during pre-installation checks.
3. Ensure all pre-installation checks laid out below have been followed.
4. Mount the ARCHISHAPE
®
Media Tube on-site. If the installation is to be left uncompleted
overnight, place all non-connected LED Engines and the ARCHISHAPE
®
Media Tube in
an indoor environment.
Ensure all the Interconnection Cables, ARCHISHAPE
®
Media Tube and LED Engines are
initially stored in a dry area to guarantee the complete sealing of the system from water before
installation.
2.2.2
Mounting Bracket
5mm screws with spring washers and washers are needed to fix the mounting bracket. The
mounting brackets can be moved and the bracket distances are recommended values.
FIG.6: Mounting Bracket (RGBW, RGB, DW)
750
75
250
AS Media Tube 300
AS Media Tube 500
AS Media Tube 1000
200
DMX+
60
650
Flat gasket and
spring gasket
(by others)
304 stainless steel
screw (by others)
NOTE: Clear view AS Media Tube and diffused view
AS Media Tube share the same mounting steps.
Address
DMX-
