Osprey Video
Osprey 800e Series User Guide
Setting Driver Properties
After you have installed the Osprey 800 series card and driver, you will be able to access the
properties for the card through most major DirectShow applications (such as Windows Media
Encoder and Flash Media Encoder). For detailed information on how to select the Osprey card and
access its Video Properties window from third-party applications, refer to the documentation for the
encoding application.
Note: Most of these encoding applications expose the drivers’ Property tabs without modification, so the examples set forth
below will probably appear as shown. However, some applications expose the Property tabs slightly differently.
Therefore, the examples below may differ somewhat.
Properties window
When your video applicat
ion, such as WME, is invited to expose the Osprey 800 series card’s video
related property pages
—
usually by navigating to the
Properties
page
—
a window appears entitled
Properties (Figure 15). Other applications display the same window, but it is entitled Osprey
820e/845e Video Capture Device(x) Properties. The “x” is the target installed Osprey 815e, 820e,
821e, 825e, or 845e card. This number is always 1 if only one Osprey 815e, 820e, 821e, 825e, or
845e card is installed.