Page
41
of
59
CONFIGURING ENCODER FOR RTSP
Return to the Web UI.
Select CH1, CH2 or CH3.
Ensure that the selected encoder shows a status of “STOPPED”
If necessary, click on the “Stop” button
Select the “Output” ribbon.
Set
“Output
Transport
” to “R
TSP
.”
The Decoder URL for the RTSP stream will be the IP address of the e /ch-1.sdp
Select the “Video” ribbon and make the appropriate Source, Output Resolution and Codec settings. Note that RTSP
supports both H.265(HEVC) and H.254(AVC).
Select the “Audio” ribbon
Select from the available options under “Source”
