OSP Designs MET42 Assembly Instructions Manual Download Page 1

MET42

METRO ENTRY WAY BENCH w/ X BACK STYLE

ASSEMBLY INSTRUCTIONS

LIMITED WarranTy

OSP Designs Warrants, to the original purchaser its products to be free from defects in material and workmanship for a period of 90 days. Defects 
and damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of OSP 
Designs is not covered. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential 
damages is excluded. The user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you 
may also have other rights which vary from state to state.

To make a warranty claim, contact Customer Service, provide model number, sales receipt and description of the problem. It is the customer’s 
responsibility to prepay freight on any components returned to the factory. OSP Designs will pay return freight on components covered under 
terms of warranty.

Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when hardware is missing. 
Our Parts Department will do everything possible to promptly remedy the problem. Contact us via email 

[email protected]

, by Fax 

1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. OSP Designs P.O. Box 
3520 Ontario, California 91761 USA

WarnInG

1. Do not use this product unless all screws and bolts are securely 

tightened.

2. Check that all screws and bolts are tight every three months or as 

needed.

3. Dispose of packing material properly. Do not use plastic cover as 

head covering. It may cause suffocation.

4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.

6. Intended for residential use only

Summary of Contents for MET42








Reviews: