O P E R A T O R ’ S M A N U A L
5
Setup Guide
Getting Started
1. Unpack all the contents and make sure they match the items
included in your order.
2. Inspect all parts for any visible transportation damage.
3. Batteries are delivered between 80% to 100% charged.
4. To charge a battery, place it in one of the battery charger bays.
Connect the battery plug to the correspondent bay charger plug.
Close the charger door and confirm the charging status light is
Red.
a. A Red light means the battery is being charged.
b. A Green light means the battery has been fully
charged.
5. Once the battery shows 100%, place it in the Battery Holder Bay
on the Lawn Mower. Ensure the battery is placed in the proper
orientation and that it fits in the holder. Connect the battery plug
to the mower connector. Ensure you hear an audible click.
6. To turn On the Mower:
a. Turn the Main Switch to the “ON” position
i. The Cooling Fan will start running immediately
after the battery is plugged in and the Main
Switch is turned ON. If you don’t hear the
Cooling Fan, please call Oso Customer Support
or your Sales Representative.
Warning - Using the mower without the Cooling
Fan running can cause the mower to overheat
under some conditions. This could result in
permanent damage to the electrical and
electronic components. This will void the
warranty
.
b. Disengage the Emergency Stop by twisting the control
panel red button. The button will slightly pop up. Press
it down again to engage the Stop.
