SECTION 6 - JLG CONTROL SYSTEM
3121784
6-3
This operation has a variable duration. Normally a few sec-
onds are sufficient, however the following screen may
appear on the display:
Figure 6-2.
In this case about 5-10 minutes are needed to send all the
information from the main board to the remote control.
The machine cannot operate within this period.
Do not stop the machine or operate it during this period.
NOTE:
The numbers shown above DOWNLOAD are the
data transferred. The Download will be completed
when about more than 29000 steps are transferred.
LCD Display Screen
At machine start-up and during machine operation the
main LCD display screen is activated. There are eight (8)
display positions which indicate machine status during
various stages of operation.
Figure 6-3.
POSITION 1:
Reduced operating area if all outriggers are not fully
deployed.
Figure 6-4.
POSITION 2:
Currently unused
Figure 6-5.
Go to
Discount-Equipment.com
to
order your
parts